★ Atlanta, Georgia

Trenchless Pipe Pulling
For Atlanta Plumbers.

The PF-12 trenchless pipe pulling system lets Atlanta plumbing contractors replace water service lines from two small access points, with no continuous trench and no restoration bill. Built in Tennessee by working plumbers. $12,995 + freight.

★ The Market

Why Atlanta needs a better way to replace water lines

40% of the homes in Atlanta were built before 1980, and the median home was built in 1993 (U.S. Census, ACS 2024). Service lines that age are reaching the end of their life, and every one that fails is a replacement job.

City records show about 187,000 service lines with none made of lead (AJC, January 2025), and DWM says it has found no lead lines to date. Replacement demand comes from aging copper services across older neighborhoods.

Mostly copper, according to a DWM spokesperson.

Traditionally, each of those jobs means trenching from the meter to the house and paying for lawn, driveway, and irrigation restoration. The PF-12 lets Atlanta contractors pull the new line through the old path instead.

★ The Ground

What you dig through in Atlanta

Atlanta sits in the Piedmont: crystalline rock under thick saprolite, the red clay of Georgia, with granitic intrusions.

Expansive clay is slow to trench and hard to restore cleanly, and a long backfilled trench can settle for months. Pulling the new line through the existing path leaves the yard largely undisturbed.

Trenching through shallow rock means hammers, rock removal, and crushed-rock bedding before you can backfill. With trenchless pipe pulling, the new line follows the path of the old service, so open excavation is limited to the two access points.

Slab foundations are the norm in the South Atlantic region: 85.7% of new single-family homes built in 2024 sat on a slab (NAHB, Census data). The PF-12's under-slab capability pulls new PEX-A beneath the slab from two small access points, without breaking up the floor.

★ Local Reference

Atlanta water service work at a glance

Here are the Atlanta utility, burial depth, permit office, licensing board, and housing age in one place.

Water utility	Atlanta Department of Watershed Management
Service line depth	The City of Atlanta's climatic design criteria list a 12-inch frost line.
Plumbing permits	City of Atlanta Department of City Planning, Office of Buildings (online technical permits).
State licensing	Georgia State Construction Industry Licensing Board, Division of Master and Journeyman Plumbers
Housing age	Median year built 1993; 40% built before 1980 (ACS 2024)

Local codes and programs change. Confirm requirements with the permit office before you start.

★ The System

What the PF-12 brings to a Atlanta plumbing business

The PF-12 gives Atlanta plumbers 20,000 lb of controlled pull, under-slab capability, and training for $12,995.

20,000 lb of controlled pull. ForceCore™ runs a 544:1 gear ratio on a 12V platform: slow, steady force, not raw winch power.
A 1' × 2' footprint. The PF-12 anchors at the access pit, so there's no heavy equipment staging in the yard.
Heads built for real service lines. The SR-Series™ scores, expands, and compacts, with Flow-Link™ articulation for bends and offsets.
Under-slab capability. Pull new PEX-A under the slab without breaking up the floor.
Training included. Every system comes with Pipe Force University onboarding and direct support from your first pull.
Financing available. See equipment financing and run the payback calculator with your own Atlanta job numbers.

See how trenchless pipe pulling works, step by step →

★ Atlanta Questions

Trenchless Pipe Pulling in Atlanta

Here are straight answers to the questions Atlanta contractors ask about permits, pricing, and demos.

Do I need a permit to replace a water service line in Atlanta?

Plan on it. Permitting authority in Atlanta: City of Atlanta Department of City Planning, Office of Buildings (online technical permits). Requirements change, so confirm with that office before you start.

How does trenchless pipe pulling work on a Atlanta job?

From a small pit at one end, the SR-91 head scores the old service line, the SR-71 wedge expands and compacts the path, and ForceCore™ pulls the new line in behind it with 20,000 lb of controlled force. No continuous trench across the yard.

How much does the PF-12 cost, and can I finance it?

The PF-12 System is $12,995 plus freight and includes Pipe Force University onboarding. Equipment financing is available on approved credit through Mazo Capital.

Can I see the PF-12 run before I buy?

Yes. Book a demo and we'll walk you through the system and the Pipe Force Method, including how it fits the ground conditions you see in Atlanta.

Ready To Stop Digging In Atlanta?

The PF-12 is $12,995 + freight, with training and support included.

Buy The PF-12 Book Your Demo

Trenchless Pipe PullingFor Atlanta Plumbers.